Bathroom

Bath Fitter Cost in Vancouver (2026)

L
Larson Hiller
••11 min read
Custom subway tile walk-in shower compared with a Bath Fitter acrylic shower in Vancouver
Bathroom renovation transformation showing modern design upgrades

If you've had a Bath Fitter flyer in the mailbox or seen the one-day ads, you probably want one thing: a real number. Bath Fitter doesn't post prices on its website. That's not unusual in this trade (we don't post a fixed price either, because no two bathrooms are the same), but it leaves you guessing before the sales visit.

So here's what Bath Fitter typically costs in Canada, how it compares to a custom tile shower, and when each one is the smarter buy. We're a tile contractor, so we have a side. We'll still tell you when a liner is the better call.

Quick answer

Bath Fitter costs about $1,600 to $4,500 for a tub liner, $3,000 to $7,500 for a typical package and $6,000 to $12,000 for a tub to shower conversion in Canada. Most installs take one day. A custom tile conversion in Vancouver costs $6,500 to $15,000+ and takes 3 to 5 days.

How Much Does Bath Fitter Cost in Vancouver?

These are the typical Canadian ranges published by SeniorCarePath (reviewed October 2026). Vancouver quotes tend to sit in the upper half of most ranges, because labour and travel cost more here than in smaller markets.

Tub liner (tub-over-tub)

Typical cost in Canada
$1,600 - $4,500
What you get
Acrylic shell fitted over your existing tub

Typical tub or shower package

Typical cost in Canada
$3,000 - $7,500
What you get
Liner plus wall surround and basic accessories, around $5,000 is common

Tub to shower conversion

Typical cost in Canada
$6,000 - $12,000
What you get
Tub removed, acrylic shower base and walls, door and fixtures

What moves your Bath Fitter cost inside those ranges? Bath Fitter lists three things on Bath Fitter's pricing page: the size, shape and material of your existing tub or shower, the products and features you pick, and any repairs needed before install. In practice the add-ons are where quotes climb. A glass door instead of a curtain rod, a built-in seat, grab bars, a soap dish, a patterned wall instead of plain white. Each one is small. Together they can add a few thousand dollars.

Tile being set on a shower wall during a custom tile shower installation in Vancouver

Why Bath Fitter Doesn't Publish Prices

Bath Fitter quotes through a free in-home or virtual consultation that runs about an hour. According to the company, you leave with a "to-the-penny" estimate, and financing with low monthly payments and 0% interest plans is offered.

A fixed written price is a good thing. Here's our advice for any bathroom quote, ours included:

  • Get every line in writing. Base, walls, door, seat, grab bars, fixtures, removal and disposal.
  • Ask what happens if they find damage. Rot or a soft subfloor changes the job. Find out how it's priced before anyone shows up.
  • Read the financing terms. 0% plans often have a promo window. Know what the rate is after it ends.
  • Don't sign on the spot. A fair price is still fair tomorrow. Sleep on it and compare at least one other quote.

Bath Fitter Tub to Shower Conversion Cost

A Bath Fitter tub to shower conversion usually runs $6,000 to $12,000 in Canada. Unlike a liner, this one isn't installed over the old tub. Bath Fitter removes the tub and puts in a custom-fit acrylic shower base, wall system and fixtures in the same footprint, and says most conversions are done in as little as one day.

That's the part people miss when comparing prices. Once the tub is out, a Bath Fitter conversion and a tile conversion are closer in scope than they look. The real differences are what goes on the walls, whether anyone inspects the studs behind them, and how much the layout can change. For the full breakdown of a tile conversion, see our tub to shower conversion cost guide.

Bath Fitter vs Custom Tile Shower

Here's how the two compare side by side:

Typical cost

Bath Fitter (acrylic)
$3,000 - $12,000
Custom tile (Sweet Finishes)
$6,500 - $15,000+

Time on site

Bath Fitter (acrylic)
Usually 1 day
Custom tile (Sweet Finishes)
3 - 5 days

Demolition

Bath Fitter (acrylic)
None for a liner, tub out for a conversion
Custom tile (Sweet Finishes)
Down to the studs

Behind the walls

Bath Fitter (acrylic)
Liner goes over existing walls
Custom tile (Sweet Finishes)
Opened, inspected and repaired

Looks and layout

Bath Fitter (acrylic)
Set colours and patterns, same footprint
Custom tile (Sweet Finishes)
Any tile, niches, bench, bigger footprint

Curbless entry

Bath Fitter (acrylic)
Limited
Custom tile (Sweet Finishes)
Yes, with floor prep

Warranty

Bath Fitter (acrylic)
Lifetime on acrylic products
Custom tile (Sweet Finishes)
2-year workmanship plus manufacturer warranties

Neither one is wrong. They solve different problems. Acrylic is about speed and low upkeep. Tile is about getting exactly the shower you want, built on walls you know are sound.

Custom subway tile walk-in shower with a recessed niche and patterned accent strip, an alternative to a Bath Fitter acrylic surround

Bath Fitter Reviews: Pros and Cons From a Contractor

We're not going to pretend acrylic systems are junk. They aren't. Here's the honest list.

What Bath Fitter does well

  • Speed. One day on site for most jobs, so you're not without a bathroom for a week.
  • No demo on liners. Less dust, less noise, nothing hauled out through your house.
  • Low maintenance. Acrylic has no grout lines to seal or scrub.
  • Warranty. A lifetime warranty on its acrylic products against defects, transferable to a new owner for purchases after June 5, 2023 (per Bath Fitter's warranty page).
  • A known price up front. One fixed number at the end of the consultation.

Where it falls short

  • It doesn't fix what's behind the wall. A liner goes over your existing surfaces. If there's hidden water damage, it's still there. SeniorCarePath flags this directly: acrylic systems aren't suited to bathrooms with hidden water damage.
  • A tub liner keeps the same step-in height. If you're doing this for safety, a liner won't make it easier to get in and out. A conversion will.
  • Limited curbless options. If you need a true roll-in shower for a wheelchair, acrylic bases are a weaker fit than a sloped tile floor with a linear drain.
  • Less design freedom. You pick from set colours and patterns. You can't add a long bench, a big niche or a larger footprint the way you can with tile.

When Bath Fitter Is the Right Call (and When It Isn't)

Our honest take after years of opening up Vancouver bathrooms:

Go with Bath Fitter or another acrylic system if it's a rental suite or a second bathroom, the tub and walls are solid with no soft spots or musty smell, the house is newer, and you mainly want it clean and done fast.

Go with tile if it's your primary bathroom, you plan to stay or sell in the next few years, or the house was built in the 1960s to 80s. In those older Vancouver, Burnaby and North Shore homes we often find rot or old leaks behind a tub surround. You want that found and fixed, not covered up. Tile is also the route for a curbless shower or a bigger layout. If accessibility is the goal, see our aging-in-place bathroom guide.

Larson Hiller, owner of Sweet Finishes, putting on safety glasses before cutting on a bathroom renovation job
Larson Hiller, owner of Sweet Finishes. If a liner suits your bathroom better, he'll say so.

Still not sure? Get both quotes. Compare them line by line, not just the total. If ours comes in higher, we'll show you exactly where the money goes, and if your bathroom honestly doesn't need tile, we'll tell you.

Bath Fitter Vancouver: Who Installs It Here

Bath Fitter started in Montreal in 1984 and works through a network of local locations, many of them independently owned. In the Lower Mainland, the Bath Fitter showroom is in Burnaby on Glenlyon Parkway and serves the wider Vancouver area. Since locations are run locally, pricing, scheduling and service can vary from one to the next, so check reviews for your specific location rather than the brand as a whole.

Questions to Ask Before You Sign Any Bathroom Quote

  • Is removal and disposal of the old tub included?
  • What happens, and what does it cost, if you find rot or water damage?
  • Is a permit needed for my job, and who pulls it? (Moving a drain usually means a plumbing permit. See our Vancouver permits guide.)
  • What exactly does the warranty cover, installation or just the product?
  • Who is actually doing the install, your crew or a subcontractor?
  • If I have a strata, who handles the approval? (Our condo bathroom guide covers how that works.)

Frequently Asked Questions

How much does Bath Fitter cost in Canada?

Most Bath Fitter jobs in Canada land between $3,000 and $7,500, with around $5,000 being typical. A tub liner alone runs about $1,600 to $4,500, and a tub to shower conversion usually costs $6,000 to $12,000. Bath Fitter doesn't publish prices, so your number comes from an in-home or virtual consultation.

Is Bath Fitter worth it?

It can be, if your tub and walls are in good shape and you want a clean, low-maintenance result in a day. It's less of a fit if the walls might hide water damage, you want a curbless shower, or you want a custom tile look that adds resale value to a primary bathroom.

Does Bath Fitter install over your old tub?

For tub liners, yes. Bath Fitter says its acrylic products are installed directly over your existing tub and shower walls with no demolition. A tub to shower conversion is different: the tub comes out and a new acrylic shower base and walls go in.

How long does a Bath Fitter installation take?

Bath Fitter says most installs are done in one day, including most tub to shower conversions. A custom tile conversion takes 3 to 5 working days because of demolition, waterproofing, tile setting and grout curing.

Does the Bath Fitter warranty transfer to a new owner?

Bath Fitter says acrylic products purchased after June 5, 2023 carry a transferable lifetime warranty against defects, so a buyer of your home can use it. Read the full warranty document for what it covers and what it doesn't.

Is Bath Fitter cheaper than a tile shower?

Usually, yes. A Bath Fitter conversion typically costs $6,000 to $12,000 in Canada, while a custom tile conversion in Vancouver runs $6,500 to $15,000+. The gap narrows once you add a door, seat and upgraded fixtures to an acrylic package.

Get a Tile Quote to Compare

If you're comparing Bath Fitter cost against other options, get a custom tile quote next to it. We'll look at your bathroom, check what's behind the tub if we need to, and give you a written price you can compare line by line.

See our bathroom renovation services or book a free consultation.

Share this article

Get a Free Quote From Larson

Tell us about your project and we'll get back to you within 24 hours. No pressure, no obligation.

L

Written by Larson Hiller

Larson Hiller is the owner of Sweet Finishes and personally leads every project. Over 10 years and 300+ completed kitchen and bathroom renovations across Greater Vancouver and the Fraser Valley. More about Larson →

Related Articles

Got a question?

We'll get back to you by email